Extras:

Type		EP 500-40	EP 750-40	L-EP 750-40	EP 1200-60	L-EP 1200-60
Capacity	KN	5	7,5	7,5	12	12
Working stroke	mm	40	40	40	60	60
Throat (A)	mm	63	80	80	80	80
Daylight (B)	mm	40-213	58-265	55-375	62-240	75-338
Daylight with DP (B)	mm	20-197	38-250	39-359	48-231	53-328
Table size (CxD)	mm	110x65	157x115	157x115	157x115	157x115
T-slot width similar to DIN 650	mm	10	12	12	12	12
Ram bore Ø x Depth	mm	10H7x25	10H7x25	10H7x25	10H7x30	10H7x30
Ram Ø (F)	mm	20	24	24	30	30
Space requirement (CxG)	mm	110x164	157x237	157x280	157x237	157x280
Stand height (K)	mm	355	450	570	450	570
Weight	Kg	aprox. 10	aprox. 20	aprox. 28	aprox. 24	aprox. 32

Precision ram adjustment (DP)
Using the fine adjustment, the bottom dead centre (BDC) of the press can be precisely set directly on the ram. The precision ram adjustment is used where highest precision of the insertion depth is required. Ideal for prototype production and series production when delicate, minute setting within the tolerance range is required.
Return travel lock (HS)
With the return travel lock partial strokes – and hence incomplete work operations – are ruled out. Forming, jointing or connecting operations are carried out safely and completely at all times. On the down stroke, the return stroke of the press is blocked. The locking device is not released and the lever is not reset until after completion of the stroke. A release mechanism permits removal of jammed components..
Table bore (TB)
Tool undersides can be seated in the table bore and secured using a transverse screw. The table bore permits rapid tool-changing and greatly reduces setting-up times.
Stroke counter (Z)
with the five-digit stroke counter, the number of items produced can be checked rapidly.