The sliding door profile is attached to the longitundinal slot. Afterwards the 6 mm bead-moulding is inlaid in the lower part of the sliding door profile. As shown in the picture surface elements can be now installed.
Material: PVC black
Panel depth allowance: frame inside height -17 mm for respectively surface elements 6 mm thick or -22 mm for surface elements 8 mm thick. For sliding doors with profile frames, the sliding block on page 188 or the roller module in chapter VI page 46) must be used.

*Note: The sliding door profile for 8mm surface elements can only be inserted into the profile slot from the side. The other versions can also be pressed into the groove from the top.