VK and L-VK. 5 to 12 kN

Type
VK 500-40
VK 750-40
L-VK 750-40
VK 1200-60
L-VK 1200-60
Capacity
KN
5
7,5
7,5
12,0
12,0
Working stroke
mm
40
40
40
60
60
Throat (A)
mm
63
80
80
80
80
Daylight (B)
mm
40-213
53-265
55-375
45-245
52-352
Daylight with DP (B)
mm
25-197
38-250
39-359
31-231
38-338
Table size (CxD)
mm
110x65
157x115
157x115
157x115
157x115
T-slot width similar to DIN 650
mm
10
12
12
12
12
Ram bore Ø x Depth
mm
10H7x25
10H7x25
10H7x25
10H7x30
10H7x30
Ram area (H)
mm
21x21
25x25
25x25
31x31
31x31
Space requirement (CxG)
mm
110x164
155x237
155x280
155x237
155x280
Stand height
mm
355
450
570
450
570
Weight
Kg
ca. 20
ca. 20
ca. 28
ca. 24
ca. 32


Extras:
Precision ram adjustment (DP)
Using the fine adjustment, the bottom dead centre (BDC) of the press can be precisely set directly on the ram. The precision ram adjustment is used where highest precision of the insertion depth is required. Ideal for prototype production and series production when delicate, minute setting within the tolerance range is required.
Return travel lock (HS)
With the return travel lock partial strokes – and hence incomplete work operations – are ruled out. Forming, jointing or connecting operations are carried out safely and completely at all times. On the down stroke, the return stroke of the press is blocked. The locking device is not released and the lever is not reset until after completion of the stroke. A release mechanism permits removal of jammed components..
Table bore (TB)
Tool undersides can be seated in the table bore and secured using a transverse screw. The table bore permits rapid tool-changing and greatly reduces setting-up times.
Stroke counter (Z)
with the five-digit stroke counter, the number of items produced can be checked rapidly.

There are no products to list in this category.
Your IP Address is: 3.88.156.58
Copyright © 2019