VK and XL-VK. 15 to 30 kN

Type
VK 1500-40
VK 1500-60
VK 2500-40
VK 2500-60
VK 3000-30
XL-VK 1500-40
XL-VK 1500-60
Capacity
KN
15,0
15,0
25,0
25,0
30,0
15,0
15,0
Working stroke
mm
40
60
40
60
30
40
60
Throat (A)
mm
100
100
100
100
100
250
250
Daylight (B)
mm
49-168
49-168
60-290
65-295
65-295
80-166
88-166
Daylight with DP (B)
mm
35-154
35-154
46-274
44-274
44-274
72-150
72-150
Table size (CxD)
mm
175x140
175x140
185x145
185x145
185x145
200x200
200x200
T-slot width similar to DIN 650
mm
12
12
12
12
12
12
12
Ram bore Ø x Depth
mm
10H7x30
10H7x30
10H7x30
10H7x30
10H7x30
10H7x30
10H7x30
Ram area (F)
mm
31x31
31x31
31x31
31x31
31x31
31x31
31x31
Space requirement (CxG)
mm
175x300
175x300
185x320
185x320
185x320
200x465
200x465
Stand height
mm
425
425
520
520
520
465
465
Weight
Kg
ca. 39
ca. 43
ca. 58
ca. 46
ca. 63
ca. 55
ca. 59


Extras:
Precision ram adjustment (DP)
Using the fine adjustment, the bottom dead centre (BDC) of the press can be precisely set directly on the ram. The precision ram adjustment is used where highest precision of the insertion depth is required. Ideal for prototype production and series production when delicate, minute setting within the tolerance range is required.
Return travel lock (HS)
With the return travel lock partial strokes – and hence incomplete work operations – are ruled out. Forming, jointing or connecting operations are carried out safely and completely at all times. On the down stroke, the return stroke of the press is blocked. The locking device is not released and the lever is not reset until after completion of the stroke. A release mechanism permits removal of jammed components..
Table bore (TB)
Tool undersides can be seated in the table bore and secured using a transverse screw. The table bore permits rapid tool-changing and greatly reduces setting-up times.
Stroke counter (Z)
with the five-digit stroke counter, the number of items produced can be checked rapidly.

There are no products to list in this category.
Your IP Address is: 107.23.129.77
Copyright © 2019