Rack and Pinion, Square Ram

Rack-and-pinion presses with round ram:
mäder rack-and-pinion presses transmit their pressing force constantly over the entire length of the stroke. Direct power transmission via the hand lever permits extreme precision in the pressing operation.
The improved transmission ration enables a higher compression force to be achieved for the same force applied.
These models are available with a force of 1,5kN and 2,5kN.
Extras:
Return travel lock (HS)
With the return travel lock partial strokes – and hence incomplete work operations – are ruled out. Forming, jointing or connecting operations are carried out safely and completely at all times. On the down stroke, the return stroke of the press is blocked. The locking device is not released and the lever is not reset until after completion of the stroke. A release mechanism permits removal of jammed components.
Table bore (TB)
Tool undersides can be seated in the table bore and secured using a transverse screw. The table bore permits rapid tool-changing and greatly reduces setting-up times.
Stroke counter (Z)
with the five-digit stroke counter, the number of items produced can be checked rapidly.
Micrometer stop (MICRO)
For high-precision assembly work with rand-and-pinion presses when it is important that the workpiece is positioned with great accuracy.

Your IP Address is: 3.80.223.123
Copyright © 2019